Misc-handling
DC Lift Adaptor
When running out of the hole with drill collars or tubing it is necessary to change out the normal rig elevator for a centre latch type. To avoid this, the regular drill pipe elevator is latched around the lift adaptor, which is attached to perfection links, which have the centre latch elevator attached to them enabling the tubing or drill collars to be lifted easily and safely.
Clamp Master
The clamp master was designed for multiple opening and closing of safety clamps without the time consuming act of making up or backing off using manual wrenches. The clamp itself, is operated by a foot pedal which opens and closes a hydraulic piston using rig air supply. It is designed to close in under 10 seconds and releases immediately. The piston is designed to cut out at 3000 psi to ensure that the clamp does not damage the pipe or tubing
Varco Insert Bowls
Varco no. 3 insert bowls come complete with 110mm grooved inlays
Spiders ( bowl and slips )
Manual tubing spiders come in 3 ½”, 4 ½” & 5 ½” body sizes with insert slips covering ¾” to 5 ½” tubing.
PS 16 Power Slips
Power Slips are designed to eliminate the manual lifting and setting of slips
Return to products page
